The first pen style tester available SMARTest has a lightweight yet rugged design very convenient for network professionals. It performs all the functions of a full-size tester-- detecting shorts opens crossed pairs reversed pairs and split pairs BUT it s just 5 inches long fitting inside your shirt pocket! SMARTest s two-button operation makes it very easy to use. A built-in remote unit allows for testing of cables both before and after installation and a built-in tone generator (probe not included) can be used with a standard probe to trace wires to their source. Features: Just 5 inches long and 1 inch wide; it fits inside your shirt pocket! Tone generator feature. Tests for wiring faults: opens shorts reversed crossed and split pairs. Detects split pair faults with just a minimum cable... Less

The LANtest Pro is a small hand-held tester that enables the user to quickly read the status of Ethernet twisted pair cables. It tests for faults such as open circuits shorts crossed pairs reversed pairs and split pairs in seconds. The LANtest Pro includes one master unit and one remote unit easily operated by one person testing patch cords or installed cables. Moreover the small remote unit is designed to slip into the master unit to prevent loss or damage. The compact design is also very user-friendly and can be conveniently carried to any job site. Tests for wiring faults of open short reversed crossed and split pairs. Split pair fault detection at a minimum 40cm cable length. Pairs tested: 1/2 3/6 4/5 7/8 and shield. Verification of shield integrity. Specially designed remote unit... Less

The LANtest Pro is a small hand-held tester that enables the user to quickly read the status of Ethernet twisted pair cables. It tests for faults such as open circuits shorts crossed pairs reversed pairs and split pairs in seconds. The LANtest Pro includes one master unit and one remote unit easily operated by one person testing patch cords or installed cables. Moreover the small remote unit is designed to slip into the master unit to prevent loss or damage. The compact design is also very user-friendly and can be conveniently carried to any job site. Features: Tests for wiring faults of open short reversed crossed and split pairs. Split pair fault detection at a minimum 40cm cable length. Pairs tested: 1/2 3/6 4/5 7/8 and shield. Verification of shield integrity. Specially designed... Less

The TC-NT2 is a convenient and comprehensive cable tester for network professionals. Its powerful and user-friendly features enable network installers to accurately check pin configurations of various voice and data communication cables. The TC-NT2 includes a master unit that transmits test signals to its corre-sponding remote terminator to verify cable reliability. It checks continuity and displays wiring configuration up to 300 meters of cable installation. With the unique feature of the audio tone generator the TC-NT2 identifies and troubleshoots faulty cables to assure proper pin and wiring structure.

The high-tech LANsmart TDR Cable Tester detects locates and displays basic wire connection problems including opens shorts miswirings and split pairs for RJ45 Cat5 Cat6 utp and STP. Plus it measures cable length using TDR (Time Domain Reflectometer) technology in real time. LANsmart displays the results in a pin-to-pin format. LANsmart will also generate tones to help find the corresponding cables; users can send out auto negotiation signals to find the corresponding hub/switch ports. LANsmart is compact ergonomic and easy to operate. Its advance functionality and versatility make LANsmart an all-in-one tester suitable for all professional technicians and installers. Features: Tests RJ45 Cat5 Cat6 utp and Sto for opens shorts miswirings reversals split pairs and shield continuity... Less

The LanMaster 35 is a new handheld tester used for installing and maintaining Local Area Networks (LAN) using Power over Ethernet (PoE). The LanMaster 35 Power and Link Tester conducts power tests with actual loads to ensure that when a powered device such as a VoIP phone wireless access point or security camera is connected to the network it will operate properly. The LanMaster 35 identifies whether power is IEEE 802.3af compliant or a legacy configuration such as Cisco Inline power for correctly connecting powered devices. The unit measures Loop Resistance to quickly identify damaged cables and bad punchdowns that cause intermittent problems or equipment malfunction. The LanMaster 35 provides Link speed and duplex mode testing capabilities for verifying connectivity of a powered or... Less

Cable Tester Kit, Lcd Display, Qualifies Voice 10/100base-t, Voip Or Gig, Troubleshoots Cabling Performance, Generates Printable Reports, Tones And Traces Cable, Includes Cableiq With Remote Adapter, Reporting Software Cd, Intellitone 200 Digital Probe, Remote Ids, Two Rj45-rj45 Patch Cords, Usb Cable, Coax F Push-on Adapter, 75-ohm Coax Patch Cord, Rj45/11 Universal Coupler, Rj11-rj11 Patch Cord, Owners Cd And Quick Start Guide, Four Aa Batteries, Soft Accessory Pouch, Hard Carry Case

* VDV PRO IS PERFECT FOR VOICE DATA & VIDEO APPLICATIONS;* VDV PRO SUPPORTS RJ-11/12 RJ-45 COAX F BNC & RCA CONNECTORS;* IENET PRO SUPPORTS RJ-45 & M12 CONNECTIONS;* BOTH MODELS MEASURE CABLE LENGTH;* IENET PRO IS DESIGNED SPECIFICALLY TO TEST INDUSTRIAL ETHERNET CABLING;* WIDE BRIGHT BACKLIT SCREEN;* EASY-TO-READ PASS/FAIL RESULTS;* DISPLAYS WIRE ERRORS INCLUDING: OPEN SHORT MISWIRE & SPLIT PAIR AND LENGTH;* MULTI-TONE SUPPORT FOR CABLE TRACING & FAULT ISOLATION;* BLINK NETWORK LINK LED FOR VISUAL CABLE TRACING;* INTEGRATED COAX - F-CONNECTION;* IENET PRO TESTS TO PROFINET INDUSTRIAL ETHERNET CABLING REQUIREMENTSUPC : 783250708444Shipp ing Dimensions : 15.60in X 8.00in X 3.60inEstimated Shipping Weight : 3.05

The NETest network cable tester is a simple but comprehensive cable tester that will diagnose wiring faults for 10BASE2 (Coax), 10BASE-T, 100BASE-Tx, 365A, TIA-586A, TIA-568B & Token Ring cables. It will not only identify wiring faults such as open wires, shorts, reversed pairs, crossed pairs, split pairs and miswiring, but also will identify up to 4 different cables from the tested end.

PRODUCT DESCRIPTION: Data & voice installation tool kit is a must have tool for UTP cable installation. The cable tester will tell you which wire has a problem. The modular plug crimping tool, and punch-down impact tool will allow you to fix loose plugs and connections with patch panels. The tool kit includes: Carrying Case Punch-down impact tool Punch Down Tool blade 66 Punch-Down Blade Reversible Punch or Punch-and-Cut Punch Down Tool blade 110/88 Punch-Down Blade Reversible Punch or Punch-and-Cut Modular Plug Ratcheting Crimping Tool - 3 in 1 8P8C and 6P6C UTP cable stripper/110 insertion tool 50 RJ-45 8P8C plugs - solid wire 50 RJ-12 6P6C plugs - stranded wire RJ-45 color coded strain relief boots.28 Pieces assorted colors Lan Tester with Remote for 8P8C... Less

The Multi Network Cable Tester - E is specifically designed for quick testing of your network cables. Featuring high speed auto scanning for wire continuity miswiring and shield integrity. Use this compact tester to test TIA568A/568B Token Ring and 10/100Base-T (UTP/STP) cables. Test installed cables with the compact remote terminator that conveniently piggy-backs onto the master unit to prevent misplacement. High speed testing of UTP/Sto and Coaxial cables. Verifies adherence to 10BASE-2 10BASE-T 100BASE-T TIA-568A TIA-568B and Token Ring wiring standards. Verifies shield integrity. Power switch. Piggy-back remote terminator design. Includes storage pouch. Test cable installations up to 200 meters (656 feet).

The Network Cable Tester is a basic cable tester designed to quickly test UTP cables for continuity. With a push of a button the Network Cable Tester will automatically scan all pairs of the subject cable for open wires or shorts. Using the provided set of DIP switches and jumpers the user can test the actual pin configuration or re-wire cables for various results. Test cable installations up to 200 meters 656 feet . Click here to see the product manual.

This network cable tester is designed to quickly test the most popular network cable wiring setups such as the 258A, eight wire system specified by AT&T or 10BASE-T Ethernet standard.

The NETest-E detects the most common wiring faults on TIA568A/568B Token Ring 10BASE-T and 10/100 BASE-T twisted-pair cables. The faults detected by the NETest-E include shorts miswiring reversed pairs and shielding faults on utp or Sto cables. Just plug a cable into the Main and Remote units and the NETest-E will begin testing automatically. Features: Small form factor of 2in W x 3in H x 1in D. Test network cable (Cat5 Cat6 UTP STP RJ45) continuity and wiring configuration. Detect common wiring faults include shorts miswiring reversed pairs and shielding faults. Test TIA568A/568B Token Ring 10BASE-T and 10/100 BASE-T twisted-pair cables. Test cable installations up to 200 meters (656 feet).

Build your home or office network with ease using this 25-ft. gray network enhanced Category 5 patch cable.

HP - 16.4 FEET MULTI-MODE FIBER-OPTIC NETWORK CABLE (BK840A). NEW.IN STOCK.

Download documents, send and receive faxes or even surf the web with the RJ-11 Printer Extender Cable from Belkin®. This cable lets you use your portable computer whether you are in a client's office, hotel, remote worksite or your very own office. Simply plug in one end of the RJ-11 connector to any laptop/laptop computer then connect the other end of the cable to a regular RJ-11 phone jack and you've got an instant connection to the world. It can also be used to extend a signal from your computer to a peripheral with the proper converter device.

300 Foot Blue cable by Trianglecables Cat 5e Patch Cords are offered in many fixed Lengths and colors. All our Catagory 5 Enhanced stranded patch cables are 350Mhz will support high speed applications. They meet TIA/EIA 568 B.2 for specifications. Great for Computer to wall Jack, Patch Panels or hubs. All are factory tested and have a lifetime warranty. We have shipped Pallets to the Bureau of Engraving and Printing so you can trust Trianglecables Ethernet cables

SYBA SY-ACC65047 50-piece Network Installation Tool Kit w/ Multi-module Cable Tester [OEM] Use this comprehensive tool set to install, maintain and troubleshoot complex networks Fully demagnetized tools offer you full protection of computer hard drive or magnetic media from damage LAN Cable Tester: Tests RJ45, UTP, 10 Base-T, Token Ring, RJ-11/RJ-12 USOC and Coaxial BNC cables Tests Cable for Continuity, Short, Open and Check Cable Type Separated Remote Units Allow One Person Testing Reversible Ratchet Handle 10-piece Assorted Bits : Slotted: 5, 6mm Philips: PH1, PH2 Pozi: PZ1, PZ2 Star: T10, T15, T20 1pc Adapter Bit for Socket 5-piece Socket Set: 3/16 - 1/4 - 5/16 - 11/32 - 3/8 inch Anti-Static/Anti Shock Wrist Band 6-piece Precision Screwdriver 4-1/2" Side Cutter 5 inch Long Nose... Less

CAT5e Ethernet cables are used to connect a computer to a network, switch, router or DSL/Cable Modem. The Cat5e connector type on this cable is called RJ45 and they are wired to the 568b standard. At CableWholesale, we offer a wide variety of colors and lengths of CAT5e cables. Our snag-less molded boots protect the connectors and clips from damage. This cable features 24AWG pure copper stranded wires for the best network signal possible. Gold contacts prevent corrosion and ensure the best possible connectivity.

Cable Tester Kit, Lcd Display, Verifies 10/100/1000 Ethernet, Pots And Poe Voltage, Cable Length, Wiremap, Cable Id And Distance, Locates Virtually Any Cable Or Wire Pair, Includes Microscanner2 Cable Verifier With Adapter, Remote Identifiers, Intellitone Pro 200 Probe, Rj45 And Rj11 Patch Cords, Test Lead Rj45 To 8 Alligator Clips, Coax F Push-on Adapter, Soft Accessory Pouch, 9v Battery, Two Aa Batteries, Microscanner2 And Intellitone Pro Quick Start Guide And Owners Cd, Deluxe Carry Case

HP C-Series SFP+ To SFP+ Copper 5.0m Network Cable 16.4ft AP785A

300 Foot Grey cable by Trianglecables Cat 5e Patch Cords are offered in many fixed Lengths and colors. All our Catagory 5 Enhanced stranded patch cables are 350Mhz will support high speed applications. They meet TIA/EIA 568 B.2 for specifications. Great for Computer to wall Jack, Patch Panels or hubs. All are factory tested and have a lifetime warranty. We have shipped Pallets to the Bureau of Engraving and Printing so you can trust Trianglecables Ethernet cables

JUNIPER NETWORKS JX-CBL-V35-DCE J SERIES FEMALE SERIAL 10FT CABLE NEW90 DAY WARRANTYManufactu rer: Juniper Networks, IncManufacturer Part Number: JX-CBL-V35-DCEProd uct Name: V.35 DCE cableProduct Type: Network CableCable Type: DCECable Length: 10 ftConnector on First End: 1 x 34-pin Female V.35 SerialConnector on Second End: 1 x 34-pin V.35Any questions or looking for a Juniper product not listed please call 781-344-8988or email sales@valuetechdi rect.com

CAT6 Ethernet cables are used to connect a computer to a network, switch, router or DSL/Cable Modem. The CAT6 connector type on this cable is called RJ45 and they are wired to the 568b standard. At CableWholesale, we offer a wide variety of colors and lengths of CAT6 cables. This cable features 24AWG pure copper stranded wires for the best network signal possible. Gold contacts prevent corrosion and ensure the best possible connectivity. CAT6 performs at higher data transfer rates than Cat5e, and is perfect for gigabit speed networking.

Add additional machines to your home or office network using this 25-ft. Category 6 computer network cable.

HP - PROCURVE 10-GBE XFP-SFP+ 1M DIRECT ATTACH CABLE.(J9300A). NEW. IN STOCK.

LinkUp Ethernet Tester With LCD Display The LinkUp Ethernet Tester will provide the first response for troubleshooting network connectivity problems. The unit’s LEDs provide instant basic connection status. The LCD display allows more detailed link analysis through the menu system. Auto-negotiation capabilities can be scrolled through. Power-Over-Etherne t voltages can be read. The LinkBlink test allows the link light on hubs and switches to determine wired port numbers. A data packet loopback test can find failures in pre-run cabling by sending actual data through the cables. The LinkUp case is ergonomically designed for one hand operation and its small size makes storage easy. LinkUp runs on 2 AA batteries and has an auto-power down feature to save battery life. Features: Identify... Less

Save yourself the time and cost of an extra service call! This easy-to-use tester helps novice home network users determine cable faults before calling for service. The SOHOtest-E (Small Office Home Office) is an economic solution to test the most commonly used cables in residential wiring--those with F and RJ-45 connectors. Use this handy tester to determine wiring faults in network phone and cable TV cables before or after installation. Features: Small form factor of 2in W x 3in H x 1in D. Pass/Fail coaxial test. Remote unit for single person testing. Compact lightweight design. RJ-45 and F connector jacks. Test cable installations up to 200 meters (656 feet).

Cable Tester, Display Yes, Application Voice, Data And Video Applications., For Use With Rj45, Rj11, Rj12, Coax F, Bnc, And Rca Connectors, Features Wire Mapper And Tone Generator. 8 Remotes And Terminators, Built-in Tone Generator, Measures Capacitance, Connector Type Rj45/11, F, Bnc, Rca, Waterproof No, Includes Case, 9v Battery, Rca/bnc Adapters