Motor Starter, Nema, Non Reversing, Nema Size 5, Nema Enclosure Type Open, Coil Volts 208, 50/60 Hz, Number Of Poles 3, 270 Amps Ac, Aux. Contact Configuration 1no, 75 Hp @ 3 Phase - 208v, 100 Hp @ 3 Phase - 230v, 200 Hp @ 3 Phase - 460v, 200 Hp @ 3 Phase - 575v, Height (in.) 9.50, Width (in.) 12.50, Depth (in.) 22.00, Standards Ul/ Csa, Includes Class 20 Solid State Ambient- compensated Overload Relay And Instantaneous Magnetic Trip Mechanism, W/ Ground Fault

Motor Starter, Nema, Reversing, Nema Size 5, Nema Enclosure Type Open, Coil Volts 208, 50/60 Hz, Number Of Poles 3, 270 Amps Ac, Aux. Contact Configuration 1no, 75 Hp @ 3 Phase - 208v, 100 Hp @ 3 Phase - 230v, 200 Hp @ 3 Phase - 460v, 200 Hp @ 3 Phase - 575v, Height (in.) 25.00, Width (in.) 11.00, Depth (in.) 18.00, Standards Ul/ Csa, Includes Class 20 Solid State Ambient- compensated Overload Relay And Instantaneous Magnetic Trip Mechanism, W/ Ground Fault

Shark KG 3.1 @ 3100 Honda Gx270 Cold Water Direct Drive Pressure Washer Professional performance, gas-powered cold water pressure washer with German engineering 3.1 GPM 3100 PSI 290cc Honda engine Commercial-duty Axial pump 100 ft. hose reel included Reinforced upright steel frame Easy to maneuver handtruck design 50' commercial-duty hose 22.00 L. 23.00 W. 42.00 H.

29332E Nachi Spherical Roller Bearing Bronze Cage 160mm x 270mm x 67mm Made in Japan 29332E Nachi Spherical Roller Bearings, Bronze Cage, Made in Japan, the 29332E inner diameter is 160mm, the 29332E outer diameter is 270mm and the 29332E width is 67mm. * Item: 29332E Spherical Roller Bearing * Type: Nachi Spherical Roller Bearing * Cage: Bronze Cage * Dimensions: 160mm x 270mm x 67mm/Metric * ID (inner diameter)/Bore: 160mm * OD (outer diameter): 270mm * Width/Height/thic kness: 67mm * Size: 160 x 270 x 67 mm * Quantity: One Bearing * Dynamic load rating Cr: 880,000 N * Static load rating Cor: 3,400,000 N * Limiting Speed: * Oil Lubrication: 1,400 RPM * Made in Japan ... Less

Synthetic Coolant, C270, 54 Gallon, Flash Point None To Boiling F, Specific Gravity 1.041, For Cooling And Chip Settling On Cast Iron, Steels And Copper Alloys, As Well As Plastics And Composites Grinding, Drilling, Tapping And Reaming Operations, Low Carryoff, Low Foam And Low Mist, Low Odor, Non Chlorinated, Leaves A Soft Protective Film On Bare Metal Parts, Corrosion Inhibition, Good Tramp Oil Rejection

Contact Adhesive, Tank, Size 270 Gal, Neutral, Temp Range Service Range -40 To 200 F, Bonding Range Up To 2 Hours, Viscosity 200-750, Specific Gravity 1.12-1.16, Substrates Flexible Polyurethane And Latex Foams, Plastic Laminate, Wood, Plywood, Particle Board, Canvas, Fabrics, Polyester Fiber And Many Plastics, A Water-dispersed, High Solids, Activated Adhesive. Immediate Bonding Capabilities And Handling Strength Without Forced Drying Equipment

Contact Adhesive, Tank, Size 270 Gal, Light Orange, Temp Range Service Range -40 To 200 F, Bonding Range Up To 2 Hours, Viscosity 200-750, Specific Gravity 1.12-1.16, Substrates Flexible Polyurethane And Latex Foams, Plastic Laminate, Wood, Plywood, Particle Board, Canvas, Fabrics, Polyester Fiber And Many Plastics, A Water-dispersed, High Solids, Activated Adhesive. Immediate Bonding Capabilities And Handling Strength Without Forced Drying Equipment,

Synthetic Coolant, C270, 5 Gallon, Flash Point None To Boiling F, Specific Gravity 1.041, For Cooling And Chip Settling On Cast Iron, Steels And Copper Alloys, As Well As Plastics And Composites Grinding, Drilling, Tapping And Reaming Operations, Low Carryoff, Low Foam And Low Mist, Low Odor, Non Chlorinated, Leaves A Soft Protective Film On Bare Metal Parts, Corrosion Inhibition, Good Tramp Oil Rejection

Testing Sieve, Frame Material Brass, Mesh Size 53 m, Opening Size #270, Outside Dia. 12 In, Overall Depth 2 In, Screen Material Stainless Steel, Standards Astm E-11

Shark BG 3 @ 3000 Honda Gx270 Cold Water Belt Drive Pressure Washer Rugged, gas-powered, belt-drive cold water pressure washer 3.0 GPM 3000 PSI 270cc Honda engine Crankcase pump Chrome handles Powder coated steel chassis Industrial-grade crankcase pump Cast iron belt pulley system 45.00 L. 26.00 W. 24.00 H.

The Honda 270cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve ...

3-Piece Cove Raised Panel Door Making Set w/Back Cutter

Testing Sieve, Frame Material Stainless Steel, Mesh Size 53 m, Opening Size #270, Outside Dia. 8 In, Screen Material Stainless Steel

This item will be shipped within 2 - 3 Weeks 6230 Steel Ball Bearing Quality: ABEC 1 150mmx 270mmx 45mm 6230 Steel Ball Bearing ABEC 1, 6230 bearing is a popular item that could be used in many applications, 6230 bearing is Open, 6230 bearing is Oil Preservative preserved. * Item: 6230 Single Row Radial Bearing Bearing * Type: Deep groove Radial ball bearings * Quality: ABEC 1 * Material: Steel * Cage: Steel * Closures: Open * Lubrication: Oil Preservative * Dimensions: 150mmx 270mmx 45mm * ID (inner diameter)/Bore: 150mm * OD (outer diameter): 270mm * Width/Height/thic kness: 45mm * Size: 150mmx 270mmx 45mm * Quantity: One Bearing * Dynamic load rating Cr: 176,000... Less

Tanaka's #1 selling gas powered drill features a reversing lever which allows you to quickly and easily change drilling directions. The TED-270PFR gas drill is ideal for utility professionals. 26 cc, 1.3 h.p. two-stroke engine 20:1 gear reduction 17.7 output torque (ft lbs.) Powered reversing feature Dual position front handle Two-year commercial use warranty / Three-year consumer use warranty / One-year rental use warranty

#270 BELT W/CHAIN FOR PORTABLE MINI SKIMMER

The TED-270PFR features a more powerful 27 cc, 1.4 h.p. PureFire engine and several safety and comfort improvements than the 262. An awesome 27 cc, 1.4 h.p. PureFire two-stroke engine knows how to dig into the job at hand. Feel the torque with 20:1 gear reduction. To help you back out there is a powered reversing feature. For operations that require hand position switch there is a dual position padded front handle. At Bailey's we understand that work can have hard knocks and on this drill there is a heavy-duty fuel tank protector as well.

Finsert, Brass, Fins 2, Thread Type Coarse, Internal Thread Size 8-32, Length 3/8 In, Drill Size 15/64 In, For Use On Wood And Plastic, Installation Use Hammer Or Arbor Press, Package 50

Brand new Freud Divided Light Cabinet Door Bit Set Produces cabinet doors with stylish glass panes, All bits have 1/2" shank, Cuts all composition materials, plywoods, hardwoods and softwoods, Use on Table Mounted Router, 1-1/4", 2, 1/2"

Finsert, Brass, Fins 2, Thread Type Coarse, Internal Thread Size 6-32, Length 3/8 In, Drill Size #5, For Use On Wood And Plastic, Installation Use Hammer Or Arbor Press, Package 50

Finsert, Brass, Fins 2, Thread Type Coarse, Internal Thread Size 10-24, Length 3/8 In, Drill Size G, For Use On Wood And Plastic, Installation Use Hammer Or Arbor Press, Package 50

22230 Bearing FLT Spherical Roller Bearing 150mm x 270mm x 73mm 22230 Spherical roller bearing FLT Brand, the inner diameter is 150mm, outer diameter is 270mm and the width is 73mm. * Item: 22230 Ball Bearing * Type: Spherical Roller Ball Bearing * Cage: Bronze * Size: 150mm x 270mm x 73mm * Quantity: One Bearing * Dynamic load rating Cr: 1,200,000 N * Static load rating Cor: 1,200,000 N * Limiting Speed: * Grease Lubrication: 1,800 RPM * Oil Lubrication: 2,400 RPM

Turbo Diamond Saw Blades

Ideal for fencing, security, plumbing, HVAC, road, sewer, steel, electrical, highway installation/main tenance, repair, and inspection. 26 cc, 1.3 h.p. two-stroke engine 8:1 gear reduction 5/8" and 1-1/4" core bit thread sizes 17.7 output torque (ft lbs.) Dual position front handle Two-year commercial use warranty / Three-year consumer use warranty / One-year rental use warranty

The Honda 270cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve ...

6230 Nachi Bearing 150mm x 270mm x 45mm Made in Japan 6230 Nachi Bearing, Made in Japan, the 6230 inner diameter is 150mm, the 6230 outer diameter is 270mm, 6230 width is 45mm. * Item: 6230 Nachi Ball Bearing * Type: Nachi Deep groove Ball Bearing * Radial Clearance: C3 * Dimensions: 150mm x 270mm x 45mm/Metric * ID (inner diameter)/Bore: 150mm * OD (outer diameter): 270mm * Width/Height/thic kness: 45mm * Size: 150 x 270 x 45 mm * Quantity: One Bearing * Dynamic load rating Cr: 176,000 N * Static load rating Cor: 168,000 N * Limiting Speed: * Grease Lubrication: 2,200 RPM * Oil Lubrication: 2,600 RPM * Made in Japan Nachi Deep Groove... Less

Gasoline Engine, 4 Cycle, 7 Hp, 3750 Engine Rpm, Gross Torque 9.2 Lbs Ft, Horizontal Shaft Orientation, Fuel Tank Capacity (qt.) 4.3, Recoil Starter Type, Electronic Ignition Type, Pre Start Only Low Oil Shut Down, Cast Iron Cylinder Liner Cylinders, Internal, Dual Ball, Pto And Flywheel, Yes Muffler, Quad-clean 4-stage All-season Heavy Duty Cyclonic Air Cleaner Type, Pleated Paper Encased W/perforated Metal/foam Pre-cleaner, Ccw-se Rotation

Pretension Screen, Plain Weave, 304 Stainless Steel Screen Material, 304 Stainless Steel Frame Material, Mesh Size 270 X 270, Mesh Size Range Fine, Wire Dia 0.0016 In, Opening Size 0.0021 In, Open Area 32.2 %, Diameter 48 In

Pretension Screen, Plain Weave, 304 Stainless Steel Screen Material, 304 Stainless Steel Frame Material, Mesh Size 270 X 270, Mesh Size Range Fine, Wire Dia 0.0016 In, Opening Size 0.0021 In, Open Area 32.2 %, Diameter 24 In

Rotary Actuator, Single Rack, Rotation Angle (deg.) 270, Torque (in.-lbs.) 1031, Bore 2-1/2 In., Port Size 1/4 In. Npt, Maximum Pressure 150 Psi, Operating Temp. Range -20f To 200f, Shaft Type Single End Standard, Shaft Length 2.031 In., Shaft Dia. 1.125 In., Keyway Length 1.875 In., Key Height With Shaft 1.531 In., Housing Material Aluminum, Powertrain Material Steel, Length 21.447 In., Width 5.749 In., Height 6.604 In.